A programmer is not necessary to use a cold air intake system. Once an intake system is installed, you will not need to add any other components unless you want to improve your engine performance beyond the capabilities of the intake system. This intake system is designed for 6.4 liter diesel trucks only. I have attached the installation instructions for you to view.
If you wanted to add a monitor to view your engine performance or a programmer to tune your engine for even greater engine... view full answer...
For a drop-in air filter that fits your 2007 Chevy Duramax 6.6 diesel (new body style), we have the PTC Custom Fit Engine Air Filter - Light Duty # 351PA5314. view full answer...
The pre-filter for the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter # AR402-101 is found on our site with part # AR799-478.
You may also be interested in the Cleaning Solution # AR790-554 and the Airaid SynthaMax Universal Replacement Premium Air Filter # AR722-478 for in the future. view full answer...
Since you said that your 2015 Ford F-150 has an 3.5L N/A Engine that means you wouldn't have the turbo. We do have programmers available for your application but we don't have any cold air intake systems compatible with your specific pickup.
Out of our available selection I recommend going with the Edge Gas Evolution CTS2 # EP85450. This is a performance tuner that comes with a monitor and can increase your HP by 16 and Torque by 27. When I spoke with my contact at Edge he said that you... view full answer...
All of our transmission coolers are actually designed to be used in addition to your OEM cooler. For the 5.3L V8 on your 2015 GMC Yukon XL (excluding 323 c.i.) the best option we have is the Derale # D13503. These coolers aren't necessarily vehicle specific. You just need to make sure that you have enough room under your hood for it. This cooler measures # 11" wide x 8-3/4" tall x 7/8" deep. I have linked a helpful article on transmission coolers that you can reference for the best place... view full answer...
There are a few things that you can do to help out your 2013 Ford Explorer for when you are towing. You can add an air intake system, a tuner, and also an aftermarket transmission cooler to get the most out of your Explorer. I do recommend getting your check engine light taken care of though as that is something you don't want on, especially when towing.
The best intake system that we have is the Airaid MXP Cold Air Intake System # AR400-260 which feature an oiled filter for superior engine... view full answer...
Nice question lets check it out I will link the part you need below:
**Replacement Handheld Remote for MaxxAir Roof Vent Intake/Exhaust Fans - Qty 1 # MA00A01150K.
The part you need is the Handheld Remote for MaxxAir roof vents, I have linked it above.
The wall control panel you have asked about will not work with the MaxxAir Roof vent. view full answer...
You will need both the Keypad # MA10-21304K and Printed Circuit Board # MA10A21275K to upgrade your MaxxAir Deluxe fan from a 7501K to a 7500K. Then you will be able to reverse your fan to intake as well as exhaust. view full answer...
The first thing that will increase your torque and horsepower is a cold air intake system like the Airaid # AR401-114. These don't have a specified amount of increase in those areas for your 2003 Ford F-250 but it is the thing to add. This will need to be cleaned periodically with the solution # AR790-554 and we also have replacement filters # AR701-445 if you ever need to replace yours.
The next thing you can add to boost your torque and horsepower is a performance tuner. I recommend... view full answer...
The Kat's Heaters Ether Start Fluid Injection System # KH33180 is confirmed to fit your 2008 Toyota 4Runner SR5 4.0L V6 Engine.
Simply pull a knob that installs in your cab to inject ether fuel (not included) into your intake manifold and get a fast, reliable startup in cold weather.
This system does not need any electricity or battery power to power it. It also is virtually maintenance-free just change out the fuel cylinder when empty.
We will not have an engine block heater that is... view full answer...
I recommend upgrading your Furrion Chill system with either the Furrion Chill HE RV Air Conditioner System # FR85PV which is a 13.5K BTU system, or Furrion Chill HE RV Air Conditioner System # FR65PV which a 15K BTU system.
Both of these systems come with the upgraded air distribution box # FACT12LA-PS which has 2 slotted registers to provide maximum airflow, 7 different color settings, and EVA foam to add a seal between the RV and ceiling to prevent leaks. view full answer...
Installing the Trailair Air Ride 5th Wheel Pin Box # LC158778 onto your trailer is pretty easy. I recommend you get help from a friend though. First you need to remove your existing Lippert 1621 or 1621HD pin box from your trailer. The Trailair uses the same bolts that held on your original pin box so no additional hardware is required during the installation process. You just remove 8 bolts from the flange, and make sure to put the new pin box in the same holes as the old as there are... view full answer...
The Advent Air RV Air Conditioner # ACM150 is a 15,000 BTU air conditioning unit that is a direct plug and play replacement for your Dometic Duo-Therm 630515.321 and you can add the Electric Heat Strip for Advent Air RV Air Conditioners - 5,500 BTU # ACMHD to help take the chill off on cold mornings. You also may want to add the Start Capacitor for Advent Air RV Air Conditioners # ACMSCKIT to help ensure that you've always got enough power to start your AC unit up. view full answer...
To install a trailer connector on your 1984 GMC 7000 you'll need to hardwire in a 4-way connector # 119250KIT and then add our # ETBC7 kit. This will provide the 7-way trailer connector on the truck and all the necessary wiring to connect a brake controller.
For a brake controller I suggest the Prodigy P2 # 90885 because of how reliable and easy to use it is. The P2 will need to be hardwired in the cab of the truck using the included pigtail. To hardwire the P2:
Black to 12V power
White... view full answer...
You're looking for the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs - Rear Axle # F42ZR, which is the Firestone part 2708 you were looking for and is a confirmed fit on your 2018 Ford F-350 Super Duty dually.
If you don't already have an on-board compressor system to keep your air bags filled from the comfort of your cabin, and give you the flexibility to adjust the air pressure on the fly, I recommend the Air Command II Compressor System # F2168. This is a dual path... view full answer...
By far the best A/C you can put on your trailer is the Furrion Chill HE RV Air Conditioner System - Single Zone # FR55PV.
This air conditioner comes with a wall thermostat that has a digital display, an air distribution box with two slotted registers for maximum airflow, dual motors that allow the fans to move cold air quicker and more efficiently, and a start capacitor that offers an extra boost to help jump-start your AC when a campsite or generator doesn't provide enough power.
This... view full answer...
When it comes to replacing your Advent AC unit on your trailer I recommend The Advent Air RV Air Conditioner - 13,500 Btu - Black # ACM135B.This system will replace, upgrade, or add an additional air conditioner to your trailer. This system is compatible with both a ductless or ducted system.
This AC can be paired with a Coleman Mach using the wiring adapter # ACCOLKIT which is sold separately. This system has a bolt-on installation, and has a black, hard plastic cover that protects the... view full answer...
When it comes to replacing your old Atwood system I recommend The Advent Air RV Air Conditioner - 13,500 Btu - Black # ACM135B.
This AC unit lets you replace an existing AC or add a new AC to your RV or camper, it will work with your existing Advent Air, Dometic, COleman Mach, or Carrier air distribution box and thermostat. Can be paired with a Coleman Mach or Carrier setup using a wiring adapter (# ACCOLKIT, # ACCARKIT - sold separately).
The AC has a black, hard plastic cover that... view full answer...
When it comes to replacing your AC Unit on your 2017 CrossRoads Z-1 Travel Trailer I recommend The Advent Air RV Air Conditioner - 15,000 Btu - Black # ACM150B.
This AC unit lets you replace your existing AC or add a new AC to your RV or camper. It works with your existing Advent Air, Dometic, Coleman Mach, or Carrier air distribution box and thermostat. The wiring kit is sold separately may be required. This system is compatible with a ductless or ducted system.
The AC has a black,... view full answer...
When airing up the Kenda K353 Bias Trailer Tire # AM10066, the tire is designed to be inflated to the 80 psi when the weather is colder. The tire can handle the increased pressure that comes with they heat up during driving. The only way it would get to hot is if you exceed the speed rating for the tire.
The Kenda Tire # AM10066 has a speed rating of 65 MPH. It has a load range C with a ply rating of 6 and has a maximum load capacity of 1,045 pounds at 80 psi.
I attached a review video... view full answer...
Go To Results